Product List

100W EFR Co2 Laser Tube Power Supply

100W EFR Co2 Laser Tube Power Supply

Description:

Model: HY-E100 for EFR 100w Co2 Laser Tubes
Alias: Co2 Laser Generator, Co2 Laser Source, Co2 Laser Device, High Voltage Power Supply

Application:

HY-E100 100W EFR laser machine power supply is used for 80W and 100W cutting and engraving acrylic, fabric, doc

Main Features:

1. Good compatibility: 100W EFR laser machine power supply is specially designed for EFR 100w Laser Tubes. It also can drive 60W and 80W common laser tubes manufactured by other factories.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 40KV.
3. You can choose Cutting Type or Sculpting Type; the Cutting Type has a good power stability and strong adaptability; the Sculpting Type is quick in response and good in engraving effect.
4. 100W EFR laser machine power supply has "TEST” button which can test output laser manually.

Advantages:

1. Easy Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and PWM signal can control the laser power.
2. 100W EFR laser machine power supply is endowed with open protection function: when protective earthing is in good condition, power supply can work for a short time under open circuit status. In this way, damage to power supply caused by burst of laser tube can be avoided. As a result, working life of EFR power supply can be prolonged.
3. It has TTL signal indication, water through signal indication and laser output indication.
4. The power has feedback interface, can be used for closed-loop control, also can be used for testing the laser tube working current.
5. 100W EFR laser machine power supply can quickly judge whether laser tube is damaged or laser power supply is damaged, which greatly facilitates the on-site maintenance.

Connection Diagram of Laser Power Supply and Laser Tube





Terminal Definition as follows:

5V Output Power Output 5V, the maximum output current is 20mA.
TH Input Signal On-Off laser control,TH≥3V, emitting laser; TL≤0.3V, no laser.
TL Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
WP Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
G GND This foot must be connected well with the laser machine shell and the ground of control board.
IN Input Signal The control of laser power: Both 0-5V analog signal and 5V PWM signal can control the laser power.

Specification of 100W EFR Laser Machine Power Supply:

Input Input Voltage AC220V or AC110V(Please be specified when placing order)
AC frequency 47—440HZ
Max Input Power 550W
Max Input Current 8A
Output Max Output Voltage ≥DC40KV
Max Output Current ≥DC 28mA
Efficiency ≥90% (full load)
MTBF ≥10000H
Response Speed ≤1ms(90% time from the TTL Signal is given to the output current up to pre-setting current)
Withstand Voltage Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Environment Operating Temperature:(-10~40)°C, Relative Humidity (RH)≤90%
Cooling Way Force-Air Cooling (FAC)
Dimension L×W×H=273×138×105 (mm)
Color Yellow


Technical Support:

1. Our range of 100W EFR laser machine power supply is CE compliant and is manufactured in accordance with ISO9001standard.
2. We are a dedicated manufacturer of CO2 laser power supply and implement strict quality controls to provide our customers with best quality products at lowest prices.
3. We have professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure power supply and laser tube wiring correct firstly, offline the control line and then press red button "TEST” to test laser tube emit light or not, which can be simple judgment on whether 100W EFR laser machine power supply works well or not.

Warranty:

Our 100W EFR laser machine power supply is available with one year warranty, during which free spare parts are available for power supply repairing purpose.

Related Products
  • 200W YAG Laser Welding Machine Power Supply
  • 200W YAG Laser Welding Machine Power SupplyHPXW6-S 200W YAG laser welding machine power generator is controlled by single chip computer. Therefore, it belongs to NC power supply. The operator can program output parameter by key board to achieve all requirements of cutting various thickness and different kinds of metals. 200W YAG laser welding machine power generator is an ideal po
  • 400W Co2 Laser Tube
  • 400W Co2 Laser TubeWe spend 7 years and large amount money in developing High Power series medium power laser generator. 400W Co2 laser tube is derived from the traditional craftsmanship and adopts particular patent technology and structure to make the facula stable and small, working life long and price low. By now, we have put 300W and 400W style of laser