Product List

80W CMA Co2 Laser Cutting Machine Power Supply

80W CMA Co2 Laser Cutting Machine Power Supply

Description:

Model: HY-C80 CO2 Laser Power Supply for 60w and 80w Yueming CMA Co2 Laser Cutting Machine
Alias: Co2 Laser Power Box,Co2 Laser Source, Co2 Laser Device, High Voltage Power Supply

Application:

HY- C80 80W CMA Co2 laser cutting machine power source is used for 60W and 80W CMA Yueming laser cutting and engraving acrylic, fabric, double color sheet and rubber, etc.

Main Features:

1. HY-C80 with DB9 pin is controlled by 0 ~ 3.3v analog signals or PWM control signal, special designed for 60W and 80W CMA laser cutting machine manufactured by Yueming factories.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 40KV.
3. You can choose Cutting Type or Sculpting Type; Cutting Type has good power stability and strong adaptability; Sculpting Type is quick in response and good in engraving effect.
4. 80W CMA Co2 laser cutting machine power source has "TEST” button which can test output laser manually.
5. Laser Power Supply has high Output Power and good stability, which can prolong laser tube's service life.

Advantages:

1. Easy to Control: The start and stop of laser can be easily controlled by TTL level. Both 0 ~ 3.3v analog signals and PWM control signal can control the laser power.
2. 80W CMA Co2 laser cutting machine power source has output open circuit protection.
3. It has TTL signal indication, water through signal indication and laser output indication.
4. HY-C80 Power supply has feedback interface which can be used for closed-loop control, also for testing the laser tube working current.

Connection Diagram of Laser Power Supply and Laser Tube

Terminal Definition:

Terminals No. Terminal Symbols Signal Direction Explain
2 WP×1 Input Signal Switch Light Control,internal through200 resistance pull up to 5V, when TL connect to the ground HV output, when unconnected there is no HV output
3 5V Output Signal Output 5V and the Max output current is 20mA
4 IN×2 Input Signal Laser Power control terminal,either 0—3.3V Analog Signal or 3.3V PWM Signal can Control
5 G Signal Ground The foot must connected with laser machine's enclosure, control board and ground properly.
6 TL Input Signal Switch Light Control,internal through200 resistance pull up to 5V,when TL connect to the ground HV output, when unconnected there is no HV output
8 12V Output Power 5V , Max output Current 20mA
1,7,9 NC -------------- NC

Caution:


WP input terminal can be used for water switch or fan switch's test terminal, Please pay attention that WP is through optocoupler connected with ground (G) as (figure2) , not as (figure 1).
(PWM control): Requirements of the PWM frequency f≥20kHz, amplitude (peak value)≤3.3V

Specification of 80W CMA Co2 Laser Cutting Machine Power Source HY-C80

Input Input Voltage AC220V or AC110V(to be specified when placing order)
AC frequency 47—440HZ
Max Input Power 550W
Max Input Current 5A
Output Max Output Voltage ≥DC40KV (AC220V input, output no-load)
Max Output Current ≥DC 25mA
Efficiency ≥88﹪(full load)
MTBF ≥10000H
Response Speed ≤1ms(90% time from the TTL Signal is given to the output current up to pre-setting current))
Withstand Voltage Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Environment Operating Temperature:(-10~40)℃,Relative Humidity (RH)≤90﹪
Cooling Way Force-Air Cooling (FAC)
Dimension L× W× H=280×173×97 (mm)
Color Black
Related Products
  • 200W YAG Laser Welding Machine Power Supply
  • 200W YAG Laser Welding Machine Power SupplyHPXW6-S 200W YAG laser welding machine power generator is controlled by single chip computer. Therefore, it belongs to NC power supply. The operator can program output parameter by key board to achieve all requirements of cutting various thickness and different kinds of metals. 200W YAG laser welding machine power generator is an ideal po
  • 300W Co2 Laser Tube
  • 300W Co2 Laser TubeWe spend 7 years and large amount money in developing high power series medium power laser generator. 300W Co2 laser tube is derived from the traditional craftsmanship, adapting particular patent technology and structure, and making the facula stable and small, working life long and price low. By now, we have put 300W and 400W style of la