Product List

80W King Rabbit Co2 Laser Cutting machine Power Supply

80W King Rabbit Co2 Laser Cutting machine Power Supply

Description:

Model: HY-T80-HX Co2 Laser Power Supply for 60w, 80w King Rabbit Co2 Laser Cutting Machine
Alias: Co2 Laser Power Box, Co2 Laser Source, Co2 Laser Device, High Voltage Power Supply

Application of 80W King Rabbit Power Source for Co2 Laser Cutting Machine:

HY-T80-HX Laser Power Supply is used for 60W and 80W King Rabbit Laser Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber, etc.

Main Features:

1. HY-T80-HX is specially designed for 60W and 80W King Rabbit laser cutting machine manufactured by King Rabbit factories. 80W king rabbit power source for Co2 laser cutting machine FG, AC, AC is wider than common type HY-T80 Co2 Laser Power Supply.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 40KV.
3. You can choose Cutting Type or Sculpting Type; the Cutting Type has good power stability and strong adaptability; the Sculpting Type is quick in response and good in engraving effect.
4. 80W king rabbit power source for Co2 laser cutting machine has "TEST” button which can test output laser manually.
5. It has high Output Power and good stability, which can prolong working life of laser tube.


Advantages:

1. Easy to Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and 5V PWM signal can control laser power.
2. 80W king rabbit power source for Co2 laser cutting machine has output open circuit protection.
3. It has TTL signal indication, water through signal indication and laser output indication.

Connection Diagram of Laser Power Supply and Laser Tube



Terminal Definition as follows:

TH Input Signal On-Off laser control,TH≥3V, emitting laser; TL≤0.3V, no laser.
TL Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
WP Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
G GND This foot must be connected well with the laser machine shell and the ground of control board.
IN Input Signal The control of laser power: Both 0-5V analog signal and 5V PWM signal can control the laser power.
5V Output Power Output 5V, the maximum output current is 20mA.

Specification of 80W king rabbit power source for Co2 laser cutting machine HY-T80-HX

Input Input Voltage AC220V or AC110V(Please be specified when placing order)
AC frequency 47—440HZ
Max Input Power 550W
Max Input Current 5A
Cold Surge Current ≤60A(AC220V Input) ≤30A(AC110 Input)
Current Leakage ≤0.7MA(AC220V Input) ≤0.4MA(AC110V Input)
Output Max Output Voltage ≥DC40KV(AC220V input, output no-load)
Max Output Current ≥DC 28mA
Efficiency ≥90% (full load)
MTBF ≥10000H
Response Speed ≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Withstand Voltage Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Environment Operating Temperature:(-10~40)°C, Relative Humidity (RH)≤90%
Cooling Way Force-Air Cooling (FAC)
Dimension L×W×H=280×173×97 (mm)
Color Black

Technical Support:

1. Our range of 80W king rabbit power source for Co2 laser cutting machine is CE compliant and is manufactured in accordance with ISO9001standard.
2. We are a dedicated manufacturer of CO2 laser power supply and implement strict quality controls to provide our customers with best quality products at lowest prices.
3. We have professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure power supply and laser tube wiring correct firstly, offline the control line and then press red button "TEST” to test laser tube emit light or not, which can be simple judgment on whether80W king rabbit power source for Co2 laser cutting machine works well or not.

Warranty:

Our 80W king rabbit power source for Co2 laser cutting machine is available with one year warranty, during which free spare parts are available for power supply repairing purpose. EnvironmentOperating Temperature:(-10~40)℃,Relative Humidity (RH)≤90﹪Cooling WayForce-Air Cooling (FAC)DimensionL×W×H=325×240×97 (mm)ColorBlack

Related Products
  • 400W YAG Laser Welding Machine Power Supply
  • 400W YAG Laser Welding Machine Power SupplyHPXW12-D 400W YAG laser welding machine power source is controlled by single chip computer. Therefore, it belongs to NC power supply. The operator can program output parameter by key board to achieve all requirements of cutting various thickness and different kinds of metals. 400W YAG laser welding machine power source is an ideal power s