Product List
Co2 Laser Power Supply
  • 35W CO2 Laser Power Supply
  • 35W CO2 Laser Power SupplyThe HY-HVCO2/0.6 CO2 laser power generator is applicable for 30W, 35W, and 40W laser cutting and eng ...
  • 50W Co2 Laser Power Supply
  • 50W Co2 Laser Power SupplyHY-HVCO2/0.8 40W Co2 laser power supply is designed for 40W cutting and engraving of acrylic, fabric ...
  • 60W Co2 Laser Power Supply
  • 60W Co2 Laser Power SupplyHY-T60 laser machine power supply is designed for 40W, 50W and 60W cutting and engraving acrylic, fa ...
  • 80W Co2 Laser Power Supply
  • 80W Co2 Laser Power SupplyHY-T80 Laser power source is designed for 60W and 80W cutting and engraving acrylic, fabric, double ...

Co2 Laser Power Supply

General Description

We have successfully developed and produced 60W, 80W, 100W, 120W, and 150W CO2 laser source combined used with CO2 laser tubes. These high voltage power supply system for laser devices are characterized by high efficiency, high frequency and high stability. They are widely used in both national and international markets, for equipment such as CO2 laser engraving machines and CO2 laser cutting machines. With over a decade experience, we mainly supply CO2 laser power supply with enhanced stability, easy use, innovative design, small size, and light weight.

Our range of CO2 laser source outputs high voltage DC voltage through converting input AC power. It is available with overvoltage protection, over current protection, and water shortage protection functions. The housing is made using imported metal panels with superior quality, and thus offers high strength and great anti-rust performance.


Our CO2 laser source is often used on CO2 laser cutting and engraving machines for acrylics, cloth, ABS plates, rubbers, leathers, and more.


1. HY-T35 35W Power Supply:
Used for laser marking machine and laser beauty equipment
2. HY-T50 50W CO2 Laser Power Source:
Designed for 40W cutting and engraving of acrylic, fabric, double color sheet and rubber, etc.
3. HY-T60 60W Laser Supply;
With input AC 220V or AC 110V Voltage, Max output DC 35KV
4. HY-T80 80W Power Generator:
Output 5V, the maximum output current is 20mA
5. HY-W120 100W-120W Tube Power Source
6. HY-T150 130W-150W CO2 Power Supply
7. HY-T1500 1500W CO2 Laser Power Generator


1. It is easy to control the terminal and install machines. The board card signal, coupled with protection switches against abnormal operations, the system is able to detect the water and air ventilation conditions automatically.
2. CO2 laser source supports 0-5V laser power adjustment through analog signal, and also supports power adjustment through PWM signal.
3. Our innovative input voltage stabilization technology ensures powerful output power and also provides the laser power supply with great compatibility with power grid voltage fluctuations. Constant current control technology makes sure the output power is stable and the control precision is high.
4. The power level adjustment system is available with multiple protections, which effectively avoids expansion of system failures.
5. Laser source comes with an intelligent system for failure detection, thus making troubleshooting much easier.
6. The power supply output parameters can be preset via the computer, which largely simplifies the operation.
7. The system supports manual laser output and low frequency laser output functions, making laser device commissioning convenient.
8. Modular structure design optimizes the production and maintenance procedures.
9. High frequency design provides laser source with minimized dimension.

Important Notes:

1. Before operation, the laser tube shall be connected with a water cooling system.
2. Open circuit for the high voltage output end is not allowed. The positive and negative terminals of the high voltage output end and the laser device shall be connected correctly.
3. Owing to the built-in bleeder resistor, laser power supply is able to discharge the residual voltage within two seconds after power failure. Just in case, please handle carefully under such conditions so as to avoid electric shock.
4. Laser source shall be used in combination with three-pin sockets which come with the grounding terminal. The housing shall be strictly grounded to avoid electrical shock.


1. Please keep laser source clean to avoid dust accumulation around the high voltage electrode. Also, the system shall be kept dry and away from metals so as to avoid high voltage electro-discharging.
2. Good heat dissipation shall be ensured.

Service Advantages

1. We can offer 24-hour technical supports via email or telephone call.
2. User-friendly English manual is also available to offer usage and maintenance instructions for laser source.

Packaging, Delivery and Payment

Packaging: Carton box
Delivery Method: By sea, air or express
Payment Terms: TT, PayPal, Western Union 100% in advance