Product List

60W Co2 Laser Power Supply

60W Co2 Laser Power Supply


Model: HY-T60 Co2 Laser Power Supply for 40W, 50W, 60W Co2 Laser Tubes
Alias: Co2 Laser Generator, Co2 Laser Source, Co2 Laser Device, High Voltage Power Supply

Application of Co2 Laser Power Supply:

HY-T60 60w Laser Cutting Machine Power Supply is designed for 40W, 50W and 60W cutting and engraving acrylic, fabric, double color sheet and rubber, etc.

Main Features:

1. Good compatibility: laser machine power supply can be used for 40W, 50W and 60W laser tubes manufactured by different factories.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 35KV.
3. You can choose cutting type or sculpting type; cutting type has outstanding power stability and adaptability; the Sculpting Type has quick response speed and good engraving effect. It can prolong laser tube's working life.
4. Laser machine power supply has "TEST” button which can test output laser manually.


1. Easy Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and 5V PWM signal can control the laser power.
2. Laser machine power supply has output open circuit protection.
3. HY-T60 Co2 Laser Power Supply has TTL signal indication, water through signal indication and laser output indication.

Connection Diagram of Laser Power Supply and Laser Tube

Terminal Definition as follows:

TH Input Signal On-Off laser control,TH≥3V, emitting laser; TL≤0.3V, no laser.
TL Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
WP Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
G GND This foot must be connected well with the laser machine shell and the ground of control board.
IN Input Signal The control of laser power: Both 0-5V analog signal and 5V PWM signal can control the laser power.
5V Output Power Output 5V, the maximum output current is 20mA.

Specification of Co2 Laser Power Supply HY-T60

Input Voltage AC220V or AC110V(Please be specified when placing order)
Input AC frequency 47—440HZ
Max Input Voltage 450W
Max Input Current 3A
Cold Surge Current ≤60A(AC220V Input) ≤30A(AC110 Input)
Current Leakage ≤0.7mA(AC220V Input) ≤0.4mA(AC110V Input)
Output Max Output Voltage DC 35KV
Max Output Current DC 24A
Efficiency ≥90% (full load)
MTBF ≥10000H
Response Speed ≤1ms(from the switch Signal is given to the output current up to 90% of the setting current)
Control Interface TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Withstand Voltage Input-Output, Input-Shell AC1500V 10mA 60S; Output negative is connected with machine shell.
Protection can work in open-circuit condition for a short time(Require a good protective earthing and avoid arc between the positive and the machine shell)
Environment Operating Temperature: (-10~40)°C, Relative Humidity (RH)≤90%
Cooling Way Force-Air Cooling (FAC)
Dimension L×W×H=207×144×97(mm)
Color Black

Technical Support:

1. Our laser machine power supply passes ISO9001 and CE.
2. We are manufacturer of Co2 laser power supply, and stick to firm quality control system, so that we can supply the best quality products with lowest prices for our client.
3. With a professional technical support group, we can assist you. Please do not hesitate to contact us if you have any product problem.
4. Manual testing: Make sure the power supply and laser tube wiring are right firstly, offline the control line and then press red button " TEST” to test whether laser tube emit light or not. This method can be served as a simple judgment as whether laser machine power supply is working or not.


Our CO2 laser machine power supply is available with one year warranty. If problem occurs during this period, we can send you Free Parts for your repairing.
Related Products
  • 300W Co2 Laser Tube
  • 300W Co2 Laser TubeWe spend 7 years and large amount money in developing high power series medium power laser generator. 300W Co2 laser tube is derived from the traditional craftsmanship, adapting particular patent technology and structure, and making the facula stable and small, working life long and price low. By now, we have put 300W and 400W style of la