Product List

300W Co2 Laser Tube Power Supply

300W Co2 Laser Tube Power Supply

Description:

Model: HY-T150-BL for 300w Co2 Laser Tubes
Notice: One tube should match 2 pieces T150-BL Power Supply, High Voltage Power Supply

Application of Co2 Laser Tube Power Supply:

HY-T150-BL 300W Co2 laser tube power generator is designed for 300w, 400w, 500w and 600w high power laser tubes Cutting and Engraving thin metal and Organic glass.

Main Features:

1. HY-T150-BL 300W Co2 laser tube power generator is specially designed for 300w, 400w, 500w and 600w high power laser tubes.
2. High output Voltage and high output Current: when input AC220V and output current is up to 38mA, Voltage can be up to 50KV.
3. High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 50KV.
4. 300W Co2 laser tube power generator has "TEST” button which can test output laser manually.
5. Quick response speed: It can remarkably enlarge laser power.

Advantages of Co2 Laser Tube Power Supply:

1. Easy to Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and 5V PWM signal can control the laser power.
2. 300W Co2 laser tube power generator has output open circuit protection.
3. It is with TTL signal indication, water through signal indication and laser output indication.

Connection Diagram of Co2 Laser Power Supply and Laser Tube

Terminal Definition as follows:

TH Input Signal On-Off laser control,TH≥3V, emitting laser; TL≤0.3V, no laser.
TL Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
WP Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
G GND This foot must be connected well with the laser machine shell and the ground of control board.
IN Input Signal The control of laser power: Both 0-5V analog signal and 5V PWM signal can control the laser power.
5V Output Power Output 5V, the maximum output current is 20mA.

QE320NU-300W :

Notice:

1. Please bind cable firmly on glass tube with electrical insulation tape to avoid damaging the tube and power supply.
2. One Laser Power Supply should be connected with another Laser Tube.Laser Power Supply HV+ connects tube+; Laser Power Supply Current Circuit connects the tube -.

Specification of 300W Co2 laser tube power generator:

Input Input Voltage AC220V or AC110V(Please be specified when placing order)
AC frequency 47- 440HZ
Max Input Power 1000W
Max Input Current 10A
Cold Surge Current ≤60A(AC220V Input) ≤30A(AC110 Input)
Current Leakage ≤0.7MAAC220V Input ≤0.4MA(AC110V Input)
Output Max Output Voltage DC 50KV
Max Output Current DC 38mA
Efficiency ≥90% (full load)
MTBF ≥10000H
Response Speed ≤1msfrom the switch Signal is given to the output current up to 90% of the setting current
Control Interface TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Withstand Voltage Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Protection can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell
Environment Operating Temperature:(-10~40)°C, Relative Humidity (RH)≤90%
Cooling Way Force-Air Cooling (FAC)
Dimension L×W×H=325×240×95(mm)
Color Black


Technical Support of Co2 Laser Tube Power Supply:

1. Our range of 300W Co2 laser tube power generator is CE compliant and is manufactured in accordance with ISO9001standard.
2. We are a dedicated manufacturer of CO2 laser power supply and implement strict quality controls to provide our customers with best quality products at lowest prices.
3. We have professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure power supply and laser tube wiring correct firstly, offline the control line and then press red button "TEST” to test laser tube emit light or not, which can be simple judgment on whether 300W Co2 laser tube power generator works well or not.

Warranty:

Our 300W Co2 laser tube power generator is available with one year warranty, during which free spare parts are available for power supply repairing purpose.

Related Products
  • 400W YAG Laser Welding Machine Power Supply
  • 400W YAG Laser Welding Machine Power SupplyHPXW12-D 400W YAG laser welding machine power source is controlled by single chip computer. Therefore, it belongs to NC power supply. The operator can program output parameter by key board to achieve all requirements of cutting various thickness and different kinds of metals. 400W YAG laser welding machine power source is an ideal power s