Product List

130W-150W Co2 Laser Power Supply

130W-150W Co2 Laser Power Supply

Description:

Model: HY-T150 CO2 Laser Power Supply for 100W, 120W, 130W, 150W Co2 Laser Tubes
Alias: Co2 Laser Generator, Co2 Laser Source, Co2 Laser Device, High Voltage Power Supply

Application of Co2 Laser Power Supply:

HY-T150 Laser Power Source is used for 100W, 120W, 130W, 150W cutting and engraving acrylic, fabric, double color sheet and rubber machines.

Main Features:

1. Good compatibility: Laser power source can be applicable to 100W, 120W, 130W, 150W laser tubes manufactured by different factories.
2. High output Voltage and high output Current: when input AC220V and output current up to 38mA, the Voltage can be up to 50KV.
3. High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 50KV.
4. Laser Power Source has "TEST” button which can test output laser manually.
5. It is endowed with fast response speed, which can remarkably enlarge laser power and prolong laser tube’s working life.

Advantages of Co2 Laser Power Tube Supply HY-T150

1. Easy Control: The start and stop of laser can be easily controlled by TTL level. Both 0-5V analog signal and 5V PWM signal can control the laser power.
2. Laser power source has output open circuit protection.
3. It has TTL signal indication, water through signal indication and laser output indication.

Connection Diagram of Laser Power Supply and Laser Tube

Terminal Definition as follows:

TH Input Signal On-Off laser control,TH≥3V, emitting laser; TL≤0.3V, no laser.
TL Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
WP Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
G GND This foot must be connected well with the laser machine shell and the ground of control board.
IN Input Signal The control of laser power: Both 0-5V analog signal and 5V PWM signal can control the laser power.
5V Output Power Output 5V, the maximum output current is 20mA.

Specification of Laser Power Source HY-T150,

Input Input Voltage AC220V or AC110V(Please be specified when placing order)
AC frequency 47- 440HZ
Max Input Power 1000W
Max Input Current 10A
Cold Surge Current ≤60A(AC220V Input) ≤30A(AC110 Input)
Current Leakage ≤0.7MAAC220V Input ≤0.4MA(AC110V Input)
Output Max Output Voltage DC 50KV
Max Output Current DC 38mA
Efficiency ≥90% (full load)
MTBF ≥10000H
Response Speed ≤1msfrom the switch Signal is given to the output current up to 90% of the setting current
Control Interface TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Withstand Voltage Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Protection can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell
Environment Operating Temperature:(-10~40)°C, Relative Humidity (RH)≤90%
Cooling Way Force-Air Cooling (FAC)
Dimension L×W×H=325×240×95(mm)
Color Black
Related Products
  • 400W YAG Laser Welding Machine Power Supply
  • 400W YAG Laser Welding Machine Power SupplyHPXW12-D 400W YAG laser welding machine power source is controlled by single chip computer. Therefore, it belongs to NC power supply. The operator can program output parameter by key board to achieve all requirements of cutting various thickness and different kinds of metals. 400W YAG laser welding machine power source is an ideal power s