Product List
High Power Co2 Laser Tube Power Supply

High Power Co2 Laser Tube Power Supply


High power Co2 laser power supply is a specially developed matching high voltage power supply according to high power Co2 laser cutting machine. With small size, nice outlook, light weight and simple operation, this laser power supply has fine matching performance, and can connect with laser directly, and no need of heavy and overheated ballast resistance. Power supply enables Co2 laser to start easier, perform better, improve transfer efficiency and prolong working life of High Power laser.


High power Co2 laser power supply is designed to cut and engrave thin metal, Organic glass, Wood die cutting, etc.


1. 300W Co2 Laser Tube Power Supply HY-T150-BL
2. 400W Co2 Laser Tube Power Generator HY-T150-BL
3. 600W Co2 Laser Tube Power Source HY-T150-BL

Main Features:

1. Good compatibility: High power Co2 laser power supply can be applicable to high laser tubes manufactured by different factories.
2. Quick response speed: it can enlarge laser power remarkably and prolong working life of laser tube.
3. Easy to Control: High level and low level are all suitable to control.
4. High power Co2 laser power supply is endowed with open protection function: when protective earthing is in good condition, power supply can work for a short time under open circuit status. In this way, damage to power supply caused by burst of laser tube can be avoided. As a result, working life of power supply can be prolonged.
5. One button to test output laser manually.
6. TTL Signal indication, water though signal indication and laser output indication.

Important Notes:

1. One power supply just corresponds to one laser tube wiring (outputted high voltage connects with positive pole and current circuit connects negative pole). Switch wiring is permitted, but cross wiring is forbidden.
2. Open circuit for the high voltage output end is not allowed. The positive and negative terminals of the high voltage output end and the laser device shall be connected correctly.
3. Owing to the built-in bleeder resistor, high power Co2 laser power supply is able to discharge the residual voltage within two seconds after power failure. Just in case, please handle carefully under such conditions so as to avoid electric shock. (Make sure the insulation safety requirements of 40KV high voltage at both ends of high voltage.)
4. High power Co2 laser power supply shall be used in combination with three-pin sockets which come with grounding terminal. Chassis shall be strictly grounded to avoid electrical shock.


1. Please keep laser power supply clean to avoid dust accumulation around the high voltage electrode. Also, the system shall be kept dry and away from metals so as to avoid high voltage electro-discharging.
2. Good heat dissipation shall be ensured.

Service advantage:

1. 24-hour technical support by email or calling
2. User-friendly English manual for power supply using and maintaining

Packaging, delivery and payment:

Product packaging: Carton Box
Delivery mode: By sea, by air or by express
Payment terms: TT, PayPal, Western Union 100% in advance