Product List

GSI Co2 Laser Power Supply

GSI Co2 Laser Power Supply

Description:

Model: HY-T150-GSI CO2 Laser Power Supply for 100w, 140w, 200w and 280w GSI Co2 Laser Tubes
Alias: Co2 Laser Generator, Co2 Laser Source, Co2 Laser Device, High Voltage Power Supply

Application of Laser Source:

HY-T150- GSI Co2 laser power supply is designed for 100w, 140w, 200w and 280w GSI laser tube cutting and engraving acrylic, fabric, double color sheet and rubber, metal, etc.

Main Features of Laser Source:

1. HY-T150-GSI ancillary use with GSI 300w Co2 Laser tubes. Connect one set (two pcs) of 150w GSI Co2 laser power supply respectively to the two opposite ends of GSI 300w laser tube. Each laser power supply is with power of 150 w.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 50KV.
3. Quick response: (the time from switching signal to output current up to 90% ): ≤1mS.
4. Increase the laser power: matching GSI laser tube can make the laser peak power up to 150 w, average power to 140 w.
5. GSI Co2 laser power supply is endowed with open protection function: when protective earthing is in good condition, power supply can work for a short time under open circuit status. In this way, damage to power supply caused by burst of laser tube can be avoided. As a result, working life of GSI laser tube can be prolonged.

Advantages of Laser Source:

1. GSI Co2 laser power supply is easy to control: High level or low level all suitable to Control.
2. Laser power control is simple: both 0 ~ 5 v analog signals and PWM control signal can control the laser power.
3. The power has feedback interface which can be used for closed-loop control and for testing the laser tube working current.
4. It can quickly judge whether laser tube is damaged or laser power supply is damaged at the scene, which facilitates on-site maintenance.

Connection Diagram of Laser Power Supply and Laser Tube

Terminal Definition as follows:

TH Input Signal On-Off laser control,TH≥3V, emitting laser; TL≤0.3V, no laser.
TL Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
WP Input Signal On-Off laser control,TH≥3V, no laser; TL≤0.3V, emitting laser
G GND This foot must be connected well with the laser machine shell and the ground of control board.
IN Input Signal The control of laser power: Both 0-5V analog signal and 5V PWM signal can control the laser power.
5V Output Power Output 5V, the maximum output current is 20mA.


Specification of Laser Source HY-T150-GSI;

Input Input Voltage AC220V or AC110V(Please be specified when placing order)
AC frequency 47- 440HZ
Max Input Power 1000W
Max Input Current 10A
Output Max Output Voltage DC 50KV Negative
Max Output Current DC 38mA
Efficiency ≥90% (full load)
MTBF ≥10000H
Response Speed ≤1msfrom the switch Signal is given to the output current up to 90% of the setting current
Control Interface TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Withstand Voltage Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Protection can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell
Environment Operating Temperature:(-10~40)°C, Relative Humidity (RH)≤90%
Cooling Way Force-Air Cooling (FAC)
Dimension L×W×H=325×240×95(mm)
Color Black


Technical Support:

1. Our range of GSI Co2 laser power supply is CE compliant and is manufactured in accordance with ISO9001standard.
2. We are a dedicated manufacturer of CO2 laser power supply and implement strict quality controls to provide our customers with best quality products at lowest prices.
3. We have professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure power supply and laser tube wiring correct firstly, offline the control line and then press red button "TEST” to test laser tube emit light or not, which can be simple judgment on whether GSI Co2 laser power supply works well or not.

Warranty:

Our GSI Co2 laser power supply is available with one year warranty, during which free spare parts are available for power supply repairing purpose.

Related Products
  • 150W EFR Co2 Laser Tube Power Supply
  • 150W EFR Co2 Laser Tube Power SupplyHY-E150 150W EFR Co2 laser tube power source is used for 100W, 120W, 130W and150W cutting and engraving acrylic, fabric, double color sheet and rubber, etc.
  • 400W YAG Laser Welding Machine Power Supply
  • 400W YAG Laser Welding Machine Power SupplyHPXW12-D 400W YAG laser welding machine power source is controlled by single chip computer. Therefore, it belongs to NC power supply. The operator can program output parameter by key board to achieve all requirements of cutting various thickness and different kinds of metals. 400W YAG laser welding machine power source is an ideal power s