Product List

100-150W CMA Co2 Laser Cutting Machine Power Generator

100-150W CMA Co2 Laser Cutting Machine Power Generator

Description:

Model: HY-C150-Y3 CO2 Laser Power Supply for 100w, 130w and 150w CMA Co2 Laser Cutting Machine
Alias: Co2 Laser Generator, Co2 Laser Source, Co2 Laser Device, High Voltage Power Supply

Application:

HY-C150-Y3 100-150W CMA Co2 laser cutting machine power generator is used for 100W, 130W and 150W CMA Yueming laser cutting and engraving acrylic, fabric, double color sheet and rubber, etc.

Main Features:

1. HY-C150-Y3 with DB9 pin, 100-150W CMA Co2 laser cutting machine power generator is controlled by 0 ~ 3.3v analog signals or PWM control signal, specially designed for 100W,130W,150W CMA laser cutting machine manufactured by Yueming factories.
2. High Voltage Power Supply: Input AC 220V or AC 110V Voltage, Max output DC 50KV.
3. You can choose Cutting Type or Sculpting Type; the Cutting Type has a good power stability and strong adaptability; the Sculpting Type has a quick response speed and good engraving effect.
4. 100-150W CMA Co2 laser cutting machine power generator has the” TEST” button which can test output laser manually.
5. HY-C150-Y3 Power Supply has high Output Power and good stability, which can prolong laser tube's service life.

Advantages:

1. Easy to Control: The start and stop of laser can be easily controlled by TTL level. Both 0 ~ 3.3v analog signals and PWM control signal can control the laser power.
2. 100-150W CMA Co2 laser cutting machine power generator has output open circuit protection.
3. It has TTL signal indication, water through signal indication and laser output indication.
4. HY-C150-Y3 Power supply has feedback interface which can be used for closed-loop control, also for testing the laser tube working current.

Connection Diagram of Laser Power Supply and Laser Tube:

Terminal Definition:

Terminals No. Terminal Symbols Signal Direction Explain
2 WP×1 Input Signal Switch Light Control,internal through200 resistance pull up to 5V, when TL connect to the ground HV output, when unconnected there is no HV output
3 5V Output Signal Output 5V and the Max output current is 20mA
4 IN×2 Input Signal Laser Power control terminal,either 0—3.3V Analog Signal or 3.3V PWM Signal can Control
5 G Signal Ground The foot must be connected with laser machine's enclosure, control board and ground properly.
6 TL Input Signal Switch Light Control,internal through200 resistance pull up to 5V,when TL connect to the ground HV output, when unconnected there is no HV output
8 12V Output Power 5V , Max output Current 20mA
1,7,9 NC -------------- NC

Caution:


WP input terminal can be used for water switch or fan switch's test terminal, Please pay attention that WP is through optocoupler connected with ground (G) as (figure2) , not as (figure 1). (PWM control): Requirements of the PWM frequency f≥20kHz, amplitude (peak value) ≤3.3V

Specification of 100-150W CMA Co2 Laser Cutting Machine Power Generator HY-C150-Y3

Input Input Voltage AC220V or AC110V(to be specified when placing order)
AC frequency 47—440HZ
Max Input Power 1000W
Max Input Current 10A
Output Max Output Voltage ≥DC50KV
Max Output Current ≥DC 38mA
Efficiency ≥90﹪(full load)
MTBF ≥10000H
Response Speed ≤1ms(90% time from the TTL Signal is given to the output current up to pre-setting current))
Withstand Voltage Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
Environment Operating Temperature:(-10~40)℃,Relative Humidity (RH)≤90﹪
Cooling Way Force-Air Cooling (FAC)
Dimension L×W×H=325×240×97 (mm)
Color Black


Technical Support:

1. Our range of 100-150W CMA Co2 laser cutting machine power generator is CE compliant and is manufactured in accordance with ISO9001standard.
2. We are a dedicated manufacturer of CO2 laser power supply and implement strict quality controls to provide our customers with best quality products at lowest prices.
3. We have professional technical support group for all the item selling. If you need any assistance on your item problem, please do not hesitate to contact us, our technical support will be there to assist you.
4. Manual testing: Make sure power supply and laser tube wiring correct firstly, offline the control line and then press red button "TEST” to test laser tube emit light or not, which can be simple judgment on whether 100-150W CMA Co2 laser cutting machine power generator works well or not.

Warranty:

Our 100-150W CMA Co2 laser cutting machine power generator is available with one year warranty, during which free spare parts are available for power supply repairing purpose.

Related Products
  • 200W YAG Laser Welding Machine Power Supply
  • 200W YAG Laser Welding Machine Power SupplyHPXW6-S 200W YAG laser welding machine power generator is controlled by single chip computer. Therefore, it belongs to NC power supply. The operator can program output parameter by key board to achieve all requirements of cutting various thickness and different kinds of metals. 200W YAG laser welding machine power generator is an ideal po
  • 400W YAG Laser Welding Machine Power Supply
  • 400W YAG Laser Welding Machine Power SupplyHPXW12-D 400W YAG laser welding machine power source is controlled by single chip computer. Therefore, it belongs to NC power supply. The operator can program output parameter by key board to achieve all requirements of cutting various thickness and different kinds of metals. 400W YAG laser welding machine power source is an ideal power s
  • 300W Co2 Laser Tube
  • 300W Co2 Laser TubeWe spend 7 years and large amount money in developing high power series medium power laser generator. 300W Co2 laser tube is derived from the traditional craftsmanship, adapting particular patent technology and structure, and making the facula stable and small, working life long and price low. By now, we have put 300W and 400W style of la